Modules
logiR-ADIO – Analog, Digital I/O and Microphone Input Module

- multipurpose board
- supports 3 digital I/Os, 1 differential or unipolar analog input, and 1 microphone input
- ADC input – measure different analog values from the test-vehicle
- DIGITAL IO – sense or activated I/Os at the automotive and other voltage levels
- MIC INPUT – for audio notification of logged events
logiR-FLEX2 – 2 Dual-Channel FlexRay Module

- 2 Freescale NXP controllers MFR4310
- FlexRay channels driven via the NXP TJA1080A PHY
- signals terminated by 100 Ohm termination resistors
logiR-UART – 2-Channel UART Module

- integrated two RS232 channels, up to 460kb/s, with the ADM3202ARN PHY from Analog Devices
- supports TX and RX signals only
logiR-LIN – 2-Channel LIN Module

- integrated 20kb/s TPIC1021DRG4 PHY from Texas Instruments
logiR-CANSW – 2-Channel CAN SW Module

- integrated CAN2.0B single wire 33kb/s or 83kb/s NCV7356 PHY from On Semiconductors
- CAN line terminated by 5K6 Ohm termination resistors
logiR-CANLS – 2-Channel CAN LS Module

- integrated CAN2.0B low speed 125kb/s TJA1055T PHY from NXP Semiconductors
- CAN lines terminated by 5K6 Ohm termination resistors
logiR-CANFD – 2-Channel CAN FD Module

- integrated CAN 2.0C 5.0 Mb/s TJA 1049T PHY from NXP Semiconductors
- CAN High Speed support
- programmable 120 Ohm termination software controlled through the logiRECORDER Dashboard
Ordering information
Product name | Product number | Description |
---|---|---|
logiR-ADIO | 61-03001-18-00001 | Analog and Digital IO module |
logiR-FLEX2 | 61-06001-18-00001 | FlexRay two dual-channel (A & B) interfaces module |
logiR-UART | 61-01001-18-00001 | UART two-channel module |
logiR-LIN | 61-01002-18-00001 | LIN two-channel module |
logiR-CANSW | 61-01006-18-00001 | CAN SW module |
logiR-CANLS | 61-01004-18-00001 | CAN LS two-channel module |
logiR-CANFD | 61-01003-18-00001 | CAN FD/HS two-channel module |